Relative to your water systems, the following information is required to assist you. There are generally two systems. The "Primary" is ocean to reservoir and the Secondary is reservoir to hatchery. On occasion, only one system is employed (directly from Ocean to Hatchery). If this is the case, then you only need to address the "Secondary" questions below. If you will in fact use two systems, then please complete all. To assist you in design, we need:

PRIMARY

Horizontal Distance from pump
Horizontal Distance of unsubmerged pipe on intake
Maximum vertical elevation differential between ocean and pump for the time period you intend to pump
Horizontal Distance of pipe from pump to reservoir
Vertical elevation differential between pump and reservoirs
Gallons per Minute you desire delivered to the reservoirs
Gallons per Minute you desire from each pump
Filtration you desire (if any)
Worst cause turbidity level of intake water
Power Availability
Type System Desired (Manual - ON/OFF or Auto - Demand)

SECONDARY

Horizontal Distance of pipe between reservoir and pumps
Vertical elevation differential between reservoir and pumps
Horizontal Distance of pipe between pumps and hatchery
Reservoirs are generally above ground thus the pumps have a flooded intake. Will this be the case?
Gallons per Minute you desire delivered to the hatchery
Gallons per Minute you desire from each pump
Filtration you desire (if any)
Power availability
Type System Desired (Manual - ON/OFF or Auto - Demand)

First Name: Middle Initial: Last Name:

Telephone: Fax:

E-Mail*: *(Required to process form.)


 

AREA Main Menu

AREA: Aquaculture Research/Environmental Associates, Inc.
P.O. Box 901303, Homestead, Florida 33090-1303
Phone: (305) 248-4205 | Fax: (305) 248-1756